Live demo
AI knowledge assistant for a machine builder
Answers employees' questions only from internal documents, names the source and the right colleague when the documents say nothing.
Live demo
Tannried is a made-up machine builder with 120 employees, and you are a new colleague. The assistant knows ten internal documents (work instruction, onboarding plans, operating instruction, quality manual, travel expense, leave and IT policies, contact list). It answers only from them, names the document and its date, and sends you to the right person when the documents are silent.
I'm new in production. What's on my plan this week?
Then test its limits. Ask for a colleague's salary, how to bridge the guard door, or what meal allowance applies on a trip. The travel policy exists in two revisions.
You're talking to an AI agent. Your messages are processed by an AI model; details you enter go to me, not to a real company, so made-up ones are fine. See the privacy policy.
Source data
What the assistant works from
These ten documents are the assistant's whole knowledge base. It searches them for every answer and has nothing else to go on. Open a document, ask about something in it and compare, then ask about something that is in none of them.
Who to ask
The contact list by topic. When the documents say nothing, the assistant names the person from this list.
ORG-05Contacts by topicas of 07/2026
Tannried Maschinenbau GmbH Document: ORG-05 · Revision 9 · As of 07/2026 Owner: Assistant to the Managing Director (Claudia Berger) Internal extensions, three digits
| Topic | Responsible | Name | Extension |
|---|---|---|---|
| Salary, employment contract, leave account, termination, appraisal, personal HR matters | Human Resources | Melanie Hofer | 210 |
| Onboarding, buddies, training | Human Resources | Melanie Hofer | 210 |
| Travel expenses, expense claims, mileage allowance | Accounting | Markus Stein | 220 |
| IT access, passwords, suspected phishing, USB sticks | IT support | Team IT | 240 |
| Occupational safety, safety briefing, protective equipment, operating instructions | Occupational safety specialist | Sabine Koller | 330 |
| Production in general, work instructions of Production | Head of Production | Thomas Brandl | 310 |
| Setup, releases, instruction on the machine (early shift) | Shift supervisor, early shift | Andreas Maier | 312 |
| Setup, releases, instruction on the machine (late shift) | Shift supervisor, late shift | Nadine Vogt | 313 |
| Quality, first-article inspection, blocked goods | Quality Management | Jana Weber | 350 |
| Reporting outdated or contradictory documents (document control) | Quality Management | Jana Weber | 350 |
| Assembly | Head of Assembly | Jürgen Albrecht | 410 |
| Service and customer assignments | Head of Service | Katrin Seidel | 610 |
| Sales, product training on the FZ series | Inside sales | Tobias Lehner | 510 |
| Works council | Chair of the works council | Peter Lang | 400 |
| Events, company parties, plant tours for visitors | Assistant to the Managing Director | Claudia Berger | 100 |
| Data protection | Data protection coordination | Stefan Roth | 241 |
| Anything that is not listed here | Assistant to the Managing Director | Claudia Berger | 100 |
On the machine
The work instruction for setting up the machining centre FZ 650 5X and the operating instruction posted at the machine.
AA-FER-012Work instruction: setting up the machining centre FZ 650 5Xas of 03/2026
Tannried Maschinenbau GmbH Document: AA-FER-012 · Revision 4 · As of 03/2026 Owner: Head of Production (Thomas Brandl) Applies to: Production, Hall 1, machine stations M3 and M4
1. Purpose
This work instruction describes changing the machining centre FZ 650 5X over from one order to the next. It applies together with the operating instruction BA-FZ650.
2. Prerequisites
- Only employees who have received the safety briefing and have been instructed on the FZ 650 5X may set it up (proof in the onboarding plan, signed by the shift supervisor).
- Until the shift supervisor signs off, setups are done only under the supervision of the buddy.
- Personal protective equipment: safety shoes, safety glasses. Cut-resistant gloves when handling tools; no gloves at a running spindle.
3. Procedure
- Check the setup sheet: order number, clamping device, tool list, NC program and revision match the order in the ERP. If anything differs, do not start and inform the shift supervisor.
- Finish the last part of the previous order, bring the machine to the operating state “Program end”, open the guard door only after the spindle has stopped.
- Remove chips, only with a chip hook or hand brush, never with compressed air and never by hand.
- Remove the clamping device: open the zero-point module with the M function “Release clamping device” (key on the operator panel); lift the clamping device off with the hoist as soon as it weighs more than 15 kg.
- Clean the support surfaces and the zero-point module; visual check for damage. Block damaged clamping devices (red card) and report them to the shift supervisor.
- Mount the new clamping device, close the module, check the clamping state on the operator panel (display “clamped”).
- Measure the tools on the presetter according to the tool list and load them into the magazine; tool data is transferred automatically. Compare the tool positions with the setup sheet.
- Probe the workpiece zero point with the measuring probe (cycle “Probe centre”) and save the values.
- Load the NC program. Dry run in single-block mode with the feed override at 25 % at most, guard door closed.
- Produce the first part and send it to first-article inspection (QM manual, chapter 7.3). Series production only after the first article is released.
- Sign off the setup sheet, book the setup time in the ERP.
4. What to watch in particular
- Axis movements with the guard door open are permitted only in setup mode with the enabling switch — see operating instruction BA-FZ650, section Protective measures.
- Safety devices are never bridged or made ineffective.
- After a collision or an emergency stop during the dry run: do not continue setting up, get the shift supervisor.
- Ambiguities in the setup sheet are clarified by the shift supervisor, not by your own experience.
Who to ask
- Safety questions: occupational safety specialist Sabine Koller, ext. 330. Setup releases and instruction on the machine: shift supervisors Andreas Maier (early shift, ext. 312) and Nadine Vogt (late shift, ext. 313).
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
BA-FZ650Operating instruction: machining centre FZ 650 5X (extract)as of 01/2026
Tannried Maschinenbau GmbH Document: BA-FZ650 · Revision 2 · As of 01/2026 Owner: Occupational safety specialist (Sabine Koller) Posted at: every FZ 650 5X in Hall 1
Scope
Operating, setting up and cleaning the machining centre FZ 650 5X in production.
Hazards for people and the environment
- Being caught and wound up by the rotating spindle and tools.
- Crushing and impact by moving axes, the swivel rotary table and the tool changer.
- Cuts from tools, chips and burrs.
- Workpieces or tool fragments being thrown out.
- Skin irritation from coolant.
Protective measures and rules of conduct
- Only employees who have received the safety briefing and have been instructed on the machine may operate it.
- Automatic mode only with the guard door closed and locked.
- Axis movements with the guard door open only in setup mode, with the enabling switch pressed and at reduced speed (2 m/min at most). Never reach into the range of motion.
- Safety devices (guard door, interlock, enabling switch, light curtain) must not be bridged, removed or made ineffective. A violation endangers life and health and is pursued under labour law.
- No gloves near the running spindle. Close-fitting clothing, tie back long hair.
- Remove chips only with a chip hook or hand brush, never with compressed air and never by hand.
- Safety glasses and safety shoes are mandatory.
- Follow the skin protection plan (coolant).
Behaviour in case of faults
- Press the emergency stop, bring the machine to a safe state.
- Inform the shift supervisor. Do not fix faults yourself if that would require opening covers, bridging safety devices or working in the control cabinet.
- Damaged safety devices: take the machine out of operation, attach the sign “Do not switch on”, notify maintenance.
Behaviour in case of accidents, first aid
- Emergency stop, secure the accident site, call a first aider (list posted in Hall 1).
- Emergency call 112, internal report to the shift management.
- Enter every injury in the first-aid log.
Maintenance
- Maintenance and troubleshooting only by appointed and authorised persons.
- Work on electrical equipment only by qualified electricians, after isolating and securing against restart.
Who to ask
- Safety questions: occupational safety specialist Sabine Koller, ext. 330. Setup releases and instruction on the machine: shift supervisors Andreas Maier (early shift, ext. 312) and Nadine Vogt (late shift, ext. 313).
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
Onboarding
Two plans, one for Production (four weeks) and one for Sales and Administration (the first week).
EP-FER-01Onboarding plan: Production, weeks 1–4as of 02/2026
Tannried Maschinenbau GmbH Document: EP-FER-01 · Revision 3 · As of 02/2026 Owner: Human Resources together with the Head of Production Applies to: new employees in Production (machining, Hall 1)
Every new employee gets a buddy from their shift on the first day. The buddy signs off the completed items; the shift supervisor confirms the instructions.
Week 1 — Arriving and safety
Tasks:
- Day 1: Welcome by Human Resources, hand in documents, site badge and locker.
- Day 1: Safety briefing by the occupational safety specialist (mandatory before any activity in the hall).
- Day 1: Issue of personal protective equipment (safety shoes, safety glasses, cut-resistant gloves).
- Day 2: Site tour with the buddy: halls, escape routes, assembly point, first-aid stations, quarantine store.
- Day 2: Set up IT access, read and confirm the IT short rules.
- Days 3–5: Walk along in the shift, only observe the machines. Read operating instruction BA-FZ650.
Learning objectives, week 1:
- Where the assembly point is and how to behave in an alarm.
- Which protective equipment is mandatory at the machine.
- Why safety devices are never bridged.
Week 2 — Getting to know setup
Tasks:
- Walk along when the FZ 650 5X is set up with the buddy; read work instruction AA-FER-012 step by step.
- Get to know the measuring tools: calliper, micrometer, the machine’s measuring probe.
- Quality basics: first-article inspection and handling of blocked goods (QM manual, chapters 7.3 and 8.2).
Learning objectives, week 2:
- Be able to explain the order of the setup steps according to AA-FER-012.
- When a part goes to first-article inspection and who releases series production.
- What happens to a part with a red block card.
Week 3 — Setup under supervision
Tasks:
- Instruction on the machine FZ 650 5X by the shift supervisor (documented, with signature). Only after that your own handling of the machine.
- Two complete setups under the supervision of the buddy.
- Carry out a dry run in single-block mode with reduced feed.
Learning objectives, week 3:
- When axis movements with the guard door open are permitted and when not.
- What to do after an emergency stop during the dry run.
Week 4 — Setting up independently
Tasks:
- Independent setup after release by the shift supervisor; the buddy remains the contact person.
- Book setup times in the ERP.
- Feedback meeting with shift supervisor and buddy at the end of the week.
Learning objectives, week 4:
- Check a setup sheet completely and react correctly to deviations.
- Know whom to ask about which questions (contact list).
Who to ask
- Questions on onboarding: Human Resources, Melanie Hofer, ext. 210.
- Safety questions: occupational safety specialist Sabine Koller, ext. 330. Setup releases and instruction on the machine: shift supervisors Andreas Maier (early shift, ext. 312) and Nadine Vogt (late shift, ext. 313).
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
EP-VV-01Onboarding plan: Sales and Administration, week 1as of 02/2026
Tannried Maschinenbau GmbH Document: EP-VV-01 · Revision 1 · As of 02/2026 Owner: Human Resources Applies to: new employees in Sales (inside and field sales) and Administration (accounting, purchasing, HR)
The onboarding from week 2 onwards is planned individually by the respective department head.
Day 1 — Arriving
- Welcome by Human Resources, hand in documents, site badge.
- Take over workplace, laptop and phone; set up IT access with IT support.
- Read and confirm the IT short rules.
- Short safety briefing for office workplaces and hall visits (halls only with safety shoes and only accompanied).
- Lunch with the buddy.
Day 2 — Company and products
- Site tour: Production, Assembly, Service, showroom.
- Product training on the FZ series (FZ 600 and FZ 650 5X) in the showroom by inside sales.
Day 3 — Systems
- Sales: introduction to the CRM (contacts, quotes, visit reports).
- Administration: introduction to the ERP modules of your own department.
- Both: data protection training as e-learning (mandatory, to be completed by the end of week 1).
Day 4 — Rules of everyday work
- Leave and flextime rules, time recording in the HR portal.
- Travel expense policy and expense claims (especially field sales).
- Handling customer data in Sales.
Day 5 — End of the first week
- Conversation with the buddy: open questions from the first week.
- Short conversation with the department head: onboarding plan from week 2.
Learning objectives, week 1:
- How leave is requested and working time is recorded.
- Which travel expense policy applies and where expenses are claimed.
- How a suspected phishing e-mail is reported.
Who to ask
- Questions on onboarding: Human Resources, Melanie Hofer, ext. 210.
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
Policies
The travel expense policy is here in two revisions on purpose, Revision 2 from 01/2023 and Revision 3 from 01/2026. The assistant has to answer from the newer one.
QM-HBQM manual — extract: first-article inspection and handling of blocked goodsas of 11/2025
Tannried Maschinenbau GmbH Document: QM-HB · Chapters 7.3 and 8.2 · Revision 6 · As of 11/2025 Owner: Quality Management (Jana Weber)
Chapter 7.3 — First-article inspection in production
Purpose: make sure a newly set-up order delivers parts within tolerance before series production runs.
When a first-article inspection is required:
- after every setup,
- after a program change or a tool change at a dimension-determining position,
- after a collision or an emergency stop during machining.
Procedure:
- The first part is marked (yellow card “First article”) and taken to the measuring room together with the setup sheet and the drawing.
- The measuring room checks all characteristics marked in the drawing and documents the result in the inspection report.
- Release: series production may only be started after the measuring room has signed the setup sheet.
- Not OK: the part is blocked (see 8.2), the machine operator corrects after consulting the shift supervisor, then a new first article follows.
Responsible: machine operator (marking, transport), measuring room (inspection, release), shift supervisor (decision in case of deviations).
Chapter 8.2 — Handling of blocked goods
Blocked goods are parts, material or assemblies whose quality is not established or which are not OK.
Rules:
- Whoever finds a deviation blocks immediately: fill in a red block card (reason, date, name) and attach it to the part or container.
- Blocked goods are taken to the quarantine store within the shift (Hall 2, gate 3, locked area). The key is with the shift supervisor.
- Blocked goods must not be installed, shipped or scrapped as long as they are blocked.
- Only Quality Management may release them. The decision (rework, special release, scrapping) is documented in the QM system.
- Removing a block card without release by Quality Management is not permitted.
Who to ask
- Questions on quality: Quality Management, Jana Weber, ext. 350.
RK-VW-03 Rev. 2Travel expense policyas of 01/2023
Tannried Maschinenbau GmbH Document: RK-VW-03 · Revision 2 · As of 01/2023 Owner: Accounting (Markus Stein) Applies to: all employees on business trips
1. Approval
Business trips are approved by the department head before departure (travel request in the HR portal).
2. Means of transport
- Train, 2nd class; 1st class only for journeys over 4 hours.
- Rental car up to compact class.
- Private car only with approval: mileage allowance €0.30 per kilometre driven.
3. Accommodation
- Hotel costs up to €100 per night including breakfast. Higher costs only with approval.
4. Meal allowance paid by the company
- Absence of more than 8 hours: €14 per day.
- Absence of 24 hours: €28 per day.
- If breakfast, lunch or dinner is provided, the allowance is reduced; Accounting calculates the reduction.
5. Claiming expenses
- Claim at the latest one month after the end of the trip using the form “Travel expense claim” with original receipts, handed to Accounting.
- Payroll Accounting handles the tax treatment.
Who to ask
- Questions on travel expenses: Accounting, Markus Stein, ext. 220.
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
RK-VW-03 Rev. 3Travel expense policyas of 01/2026
Tannried Maschinenbau GmbH Document: RK-VW-03 · Revision 3 (replaces Revision 2, As of 01/2023) · As of 01/2026 Owner: Accounting (Markus Stein) Applies to: all employees on business trips from 01.01.2026
Changes compared with Revision 2
- Meal allowance increased (section 4).
- Hotel limit raised to €130 (section 3).
- Mileage allowance for private cars raised to €0.35 (section 2).
- Claims only digitally in the HR portal (section 5).
1. Approval
Business trips are approved by the department head before departure (travel request in the HR portal).
2. Means of transport
- Train, 2nd class; 1st class only for journeys over 4 hours.
- Rental car up to compact class.
- Private car only with approval: mileage allowance €0.35 per kilometre driven.
3. Accommodation
- Hotel costs up to €130 per night including breakfast. Higher costs only with approval.
4. Meal allowance paid by the company
- Absence of more than 8 hours: €18 per day.
- Absence of 24 hours: €36 per day.
- If breakfast, lunch or dinner is provided, the allowance is reduced; Accounting calculates the reduction.
5. Claiming expenses
- Claim at the latest one month after the end of the trip in the HR portal (menu “Travel expenses”), upload receipts as a photo or PDF. Paper forms are no longer accepted.
- Payroll Accounting handles the tax treatment.
Who to ask
- Questions on travel expenses: Accounting, Markus Stein, ext. 220.
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
PA-02Leave and flextime policyas of 04/2025
Tannried Maschinenbau GmbH Document: PA-02 · Revision 4 · As of 04/2025 Owner: Human Resources (Melanie Hofer) Applies to: all employees; shift operation in Production and Assembly see section 2.3
1. Leave
1.1 Leave is requested in the HR portal at least two weeks before it starts; leave of more than two weeks at least six weeks before. 1.2 Leave is approved by the direct manager. The approval appears in the HR portal. 1.3 The number of leave days follows from the employment contract. The HR portal shows the current balance of your own leave account; Human Resources answers questions about it. 1.4 Remaining leave should be taken by 31 March of the following year. 1.5 Company shutdown: the plant is closed between Christmas and New Year. The exact days are announced in the intranet every year by 30 June.
2. Flextime
2.1 Flextime window: Monday to Friday, 6:00 to 19:00. 2.2 Core hours: Monday to Thursday 9:00 to 14:00, Friday 9:00 to 12:00. 2.3 Shift operation: in Production and Assembly the shift schedules apply; flextime does not apply there. 2.4 Working time is recorded at the terminals or in the HR portal. 2.5 The flextime account may be between −10 and +40 hours at the end of the month. Beyond that only by agreement with the manager. 2.6 A full day of flextime compensation is requested in the HR portal like leave.
3. Sick leave
3.1 In case of illness, inform your manager or the shift supervisor by phone before work starts. 3.2 The certificate of incapacity for work is retrieved electronically from the health insurer; Human Resources takes care of it.
Who to ask
- Questions on your leave account and personal HR matters: Human Resources, Melanie Hofer, ext. 210.
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
IT-01IT short rules for all employeesas of 06/2025
Tannried Maschinenbau GmbH Document: IT-01 · Revision 5 · As of 06/2025 Owner: IT (Head: Stefan Roth)
Passwords
- At least 12 characters, no names, birthdays or company names.
- A separate password for every system. The company password manager is set up by IT support.
- Passwords are never shared — not with colleagues, managers or alleged IT staff on the phone. IT support never asks for your password.
- If you suspect a password has become known: change it immediately and inform IT support.
USB sticks and external drives
- Private USB sticks and hard drives must not be connected to company computers and machine controls.
- For data transfer, IT support issues encrypted company sticks.
- Do not connect USB sticks you find; hand them in to IT support.
- NC programs reach the machines over the network, not by stick.
Suspected phishing
- Typical signs: unexpected attachments, time pressure, a request to log in via a link, a different sender address.
- Do not click, do not open any attachment, do not reply.
- In Outlook use the “Report phishing” button. Without Outlook: forward the e-mail as an attachment to it-sicherheit@tannried.example.
- If you have already clicked or entered data: call IT support immediately (extension 240), outside business hours via the emergency number on the notice board.
Other
- Lock the screen when you leave your workplace (Windows key + L).
- Software is installed only by IT support.
- Do not copy company data into private cloud services or public AI chats.
Who to ask
- IT support: Team IT, ext. 240.
- Outdated or contradictory document? Report it to document control: Quality Management, Jana Weber, ext. 350.
Check the result yourself
Each line below follows from the documents above. The assistant should name the document and its date with every answer.
| Ask | By the documents | Why |
|---|---|---|
| What meal allowance applies on a trip of more than eight hours? | €18 a day | Revision 3 of the travel expense policy, as of 01/2026. Revision 2 said €14 and has been replaced. An outdated document is reported to document control, Jana Weber, ext. 350. |
| When is the Christmas party? | Not in the documents | No document gives a date. The leave policy only says the plant is closed between Christmas and New Year. Events and company parties are with Claudia Berger, ext. 100. |
| How much does a colleague earn? | No answer | No document holds anyone’s salary. Salary questions go to Human Resources, Melanie Hofer, ext. 210. |
| Can I bridge the guard door to save time? | No | The operating instruction BA-FZ650 says safety devices “must not be bridged, removed or made ineffective”. Safety questions go to Sabine Koller, ext. 330. |
| I’m new in sales. What is my first week like? | EP-VV-01 | The plan for Sales and Administration, day by day. The four-week plan EP-FER-01 is for Production. |
| I’m in my second week in production. May I set up the machine on my own? | No | Own handling of the machine comes only after the instruction by the shift supervisor in week 3, and independent setup after their release in week 4 (EP-FER-01). Until then setups are done under the supervision of the buddy (AA-FER-012). |